Prepolimero TDI XCPU-P865 POLYETH
Ottieni l'ultimo prezzoTipo di pagamento: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Quantità di ordine minimo: | 1000 Kilogram |
Trasporti: | Ocean |
Porta: | Shanghai |
Tipo di pagamento: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Quantità di ordine minimo: | 1000 Kilogram |
Trasporti: | Ocean |
Porta: | Shanghai |
Modello: XCPU-P865
marchio: Xuchuan
Luogo D'origine: Cina
Tipi Di: Resina sintetica e plastica
Application: PU Elastomers, PU plate ,PU bar, Sealing ring, PU rollers and other products.
Features: Water resistance, low temperature resistance, mildew resistance
Name Of Products: XCPU-P865
Appearances: Liquid
Unità vendibili | : | Kilogram |
Tipo pacchetto | : | 20 e 200 kg/tamburo |
Esempio immagine | : |
Descrizione del prodotto
CPU per elastomeri
POLYETHER TDI PREPOLYMER XCPU-P865 |
1, questo prodotto è una sintesi di poliolo poliolo e toluene diisocianato (T-80) di
POLITETANO POLYETERE POLIGULYMER.
2, Caratteristiche: resistenza all'acqua, resistenza a bassa temperatura, resistenza al sia di Ildew
3, Applicazione : Piatto PU , barra PU, anello di tenuta , rulli PU e altri prodotti.
4, specifica del prodotto
Name of products |
Appearances |
Viscosity(mPa.s/85℃) |
NCO% content |
Package(kg) |
XCPU-P865 |
liquid |
300-330 |
6.50-6.70 |
20 / 200 |
5, Condizioni di miscelazione e cura
MOCA Level |
Recommended % Theory |
Prepolymer Temperature |
Curative Temperature |
Pot Life |
Demould Time |
Post Cure Time |
% |
% |
℃ |
℃ |
mins |
@ 100°C (hrs) |
@ 100°C (hrs) |
19.6 |
95 |
75-85 |
110-120 |
2.5-3 |
1 |
10 |
6 , procedura di elaborazione:
Prepolimero a 75 ~ 85 ℃ Preriscaldamento, dopo il degasaggio del vuoto, il MOCA di fusione buono
miscelazione omogenea, dearazione, versamento, modanatura, modanatura di vulcanizzazione, stripping, vulcanizzazione.
Prepolimero di polisetro per anello
7, Proprietà fisiche
POLITETANO POLYETERE POLIGULYMER
Le proprietà presentate di seguito devono essere utilizzate come guida e non destinate a scopi di specifica.
Hardness |
Shore A |
97 |
Tensile Strength |
MPa |
35 |
100% Modulus |
MPa |
15.2 |
300% Modulus |
MPa |
24.6 |
Angle Tear Strength, Die C |
kN/m |
95 |
Trouser Tear Strength |
kN/m |
35 |
Elongation |
% |
440 |
Resilience |
% |
41 |
DIN Abrasion Resistance 10N |
mm 3 |
143 |
Cured Specific Gravity |
g/cm3 |
1.16 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.